Ti500 - 2 channels power amplifier, 2 x 250 W on 4 ohm, Class-D, 1U rack

2 channels power amplifier, 2 x 250 W on 4 ohm, Class-D, 1U rack

Professional stereo audio amplifier, Ti series, 2x250 W on 4 ohm. 500 W in bridge mono mode.When silence is aVery important factor, you can rely on Ti 500WhichWorks as silently as possible. That makes these amplifiers perfect for studio, permanent installations and theatres. These Class-D amplifier feature SMPS unit and offer a perfect sound reproduction despite their ultra-compact Dimensions.With every connection you need they're perfectly adapted for any sound system, studio, and even HiFi applications. They also feature thermal and electronic protections, so you can operate them safely andWith great serenity.

OVERVIEW

• Class-D amplifier
• Switched-mode power supply
• Mode selection: Stereo, Bridge or Parallel
• Independent limiter for each channel
• Extremely accurate and independent level settings for each channel
• LEDs indicators
• Convection cooled
• Balanced Jack TRS and XLR inputs
• Unbalanced RCA outputs
• Binding post-jacks or speakON® outputs
• Short-circuit, over current and high temperature independent protections for each channel
• 2x19'' rack mount spaces

Technical specifications

• Stereo Max power: 4 O RMS stereo power (minimum): 2 x 250 W RMS; 8 O RMS stereo power: 2 x 130 W RMS
• Mono bridged Max power: 8 O bridged power (minimum): 1 x 500 W RMS 
• Signal-to-noise ratio Less than 90  dB
• Input sensitivity: 4 dBu +/-2  dB
• Distortion: THD at 1 kHz 1/2 rated power Less than 0.1%; Slew rate: - 65  dB at 1  kHz;
• Frequency response (4 O/1 W): +0.5  dB ; 20  Hz-20  kHz
• Input impedance: unbalanced 15 kO / Balance 30 kO 
• Clip: 0 dBr
• Cooling: Convection cooled
• Input connectors: XLR3-F, Balanced 6.35 mm TRS-F jack + Unbalanced RCA
• Output connectors: Binding post-jacks + 4-pole speakON®
• Front control panel: AC power switch, Channel 1 and 2Volume
• Rear control panel: Mode selection button
• Indicators: Protect (red) / Clip (yellow) / Signal (green)
• Protections: Short-circuits, over current and high temperature protected
• Power supply: 100/230  V_AC - 50/60  Hz
• Dimensions: 482 mm x 44 mm x 330 mm
• NetWeight: 4.7 kg