High density analog output card with 16 out on 2 x DB-25
The AxC-AS16O V2 is a 16-channel high-density analog output card on 2 x DB-25 connectors that combines high-performance D/A conversion chips in an incredibly compact size for high-end professional audio applications. It must be inserted in the slot available on the rear panel of the Agora H1 to build the audio bridge.
Applications
AxC-AS16O V2 is suitable for all professional applications that require a large number of high-quality analog outputs with small dimensions:
New standards in quality, price and density ratio for professional audio applications
Large analog line output capability with high performance, high class D/A converter chip and excellent circuit design
Attenuation/gain settings and VU-meter can be individually controlled and monitored per channel via network for remote management virtually anywhere
Dedicated control page to monitor and control all board parameters (gain, mute, phase, level on each channel, pre-amp values, VU-meter)
Main features
16 high quality balanced outputs with dynamic range > 112 dB and THD+N <-90 dB
Individual gain control of each output
An intelligent internal design that reduces loud noises during power on and off, meeting the constraints of using high power sound amplification systems
Fully software controllable digital attenuation in 0.5 dB steps to allow fine-tuning to address a wide variety of applications in professional audio systems
2 Sub-DB25 female connectors
General
Size
200 mm x 100 mm x 40 mm – AuviTran Audio ToolBox platform cards format
Power supply
+12 V / +3.3 V
Storage: temp / humidity
- 5 °C to 70 °C / 0% to 95% (non-condensing)
Operating: temp / humidity
0 °C to 50 °C / 5% to 90% (non-condensing)
Connectors
2 x or 1 x female DB-25 connectors (Yamaha pin out) Optional: DB25 to Euro-Block plug available
Audio outputs
Number of outputs
AxC-AS16O V2: 16 analogue outputs
Audio outputs Specifications
Sampling frequency
44.1 kHz, 48 kHz, 88.2 kHz or 96 kHz
D/A resolution
24 bits
Frequency response
20 Hz – 20 kHz (±0.2 dB)
Dynamic range (BW 22 kHz)
>112 dB A-weighted (>110 dB un-weighted)
THD+N (1 kHz / BW 22 kHz)
< -90 dB
Output specification
balanced on DB-25 connectors, <100 ohm output impedance
Output level pad for 0 dBfs
+24 dBu or +10 dBu configurable by software via network
Output volume control
+10 dB to -115 dB with 0.5 dB step digital control by software via network with click and plop free management. Digital automatic mute @ zero-data with plop-free output mute
Output phase
Phase inversion configurable by software via network
English 
French
