USB ONE - USB 2.0 to DMX-512 Interface, 1 x DMX-IN/OUT

€ 254,40 VAT excluded SKU: IA-HW-001001 product.detail.ean: 4260263421011

USB 2.0 to DMX-512 Interface, 1 x DMX-IN/OUT

MADRIX USB ONE is a USB 2.0 > DMX-512 interface cable with 1 x DMX-IN/OUT. This is one of the smallest USB interfaces for DMX input or output on the market.
MADRIX USB ONE allows you to control 512 DMX channels using MADRIX software and is primarily intended for DMX input. A MADRIX KEY (software licensed) is required to activate the DMX output and a 3 or 5 pin male to male XLR adapter. The MADRIX USB ONE allows you to control 512 DMX channels using MADRIX 5. Mainly used for DMX input, an additional MADRIX KEY (a software license) is required for DMX output.

DMX-IN/OUT with 5-pin Neutrik XLR port

This device allows you to send or receive DMX data using 512 DMX channels. A male to male 3-pin or 5-pin XLR Gender Changer is required for DMX-IN.

USB 2.0 standard

The USB 2.0 standard is fully supported to allow for a higher maximum speed of 480 MBit/s.

Power over USB

The interface is powered directly via the USB port and does not need an additional power supply.

High quality

The USB ONE represents high quality made in Germany and is very reliable.

Hot swapping and Plug & Play

Devices can be connected to and disconnected from the computer during use and without a reboot.

Remote control

MADRIX software can be controlled remotely using the implemented DMX-IN functions.

Frame rate stability

Up to 60 devices can be connected to a USB host controller without having any frame rate problems (60 DMX-512 interfaces amount to 30,720 DMX channels).

Active USB

Please connect every USB ONE to an active USB 2.0 port or use a USB 2.0 hub with a power supply.

€ 254,40 VAT excluded SKU: IA-HW-001001 product.detail.ean: 4260263421011