A revolutionary solution for wireless load cells
We have put a lot of efforts in developing the module that contains the electronics and battery holders. Everything has been designed to isolate the electronic circuits as much as possible with a double protective hermetic shell.
Exclusive design
The batteries are compact and borrow design features from the camera industry to ensure stable performance and long life. The cylinder shape of the enclosure limits shocks and the anti-rotation ring is integrated into the pin, leaving the upper part of the shackle free.
All protected, all simple
A magnetic key for switching on and off. The switch is a fully sealed magnetic reed. No tools needed to access the batteries, just unscrew the cap. The impact-resistant polycarbonate shell is semi-transparent to see the RGB multifunction LED.
Max No. of cells per system: 100 units
Max No. of repeaters per Gateway: 5 units
Load sampling: every 1 s
Max. transmission rate: every 1 s
Optimized transmission rate: according to the load status (when the load stabilizes, the rate decreases)
Batteries: 2 x CR 123 (battery replacement without tools)
IP grade: IP67
Status display: multifunction RGB LED
Power ON/OFF: with magnetic key (or any other magnet)
Frequency range: 868 MHz
Range (Cells/Gateway): up to 600 m (line-of-sight)
Data storage: local PC (connected to Gateway via USB cable)
Expected battery life: 3000 / 7000 h
Installation: Plug & Play (no radio set up)
Case for electronic: semi-transparent screwable cap
Available loads: 4,75 t
Load value accuracy: 35 kg ±2% whichever is the greater value
English 
French
