All-in-one LED display controller up to 3.9 Mpixel
The MX20 is an all-in-one LED display controller that integrates video processing and control into a single device. It offers 2 HDMI 1.3 connectors, 1 x 3G-SDI input connector, 6 Ethernet output ports and 2 10G optical ports. It can also work with the newest VMP (Vision Management Platform) software to provide better operation and control experience.
EDID management supports standard resolutions, up to 1920×1080 @ 60 Hz. Support custom input resolutions.
HDCP support HDCP 1.4
Interlaced signal inputs not supported
3G-SDI IN x 1
Standards support ST-424 (3G), ST-292 (HD) and ST-259 (SD) standard video inputs. Support 3G-Level A / Level B (DS mode)
Max. resolution: 1920×1080 @ 60 Hz
Frame rates 23.98 Hz to 60.00 Hz
Interlaced signal inputs support MQ level deinterlacing. The interlaced signals will be automatically detected and converted to progressive signals
Output
1–6: Gigabit Ethernet output ports. Support hot backup between Ethernet ports.
Max device load capacity: 3.9 Mpixels
The maximum load capacity per Ethernet port is as follows. For details, see the Ethernet port load capacity section.
8 bit @ 60 Hz: 659,722 pixels
10 bit @ 60 Hz: 329,861 pixels. When the controller works with the A10s Pro receiving card, the capacity can be up to 494,791 pixels.
OPT 1–2: 10G optical output ports
OPT 1 transmits the data of Ethernet ports 1 to 6
OPT 2 is the copy channel of OPT 1
HDMI 1.3 LOOP x 2 HDMI loop through. Up to 8 devices can be cabled in one loop
3G-SDI LOOP x 1 SDI loop through. Up to 8 devices can be cabled in one loop
SPDIF OUT 1 A digital audio output (reserved)
Controls
Ethernet x 2 Gigabit Ethernet control ports. Support TCP/IP protocol and star topology
They have the same functions without priority and order, and can be connected to VMP software. No switch or router is needed to deploy multiple devices on the same LAN via device cascading as the network switching function is already built in. Up to 20 MX20 devices can be cascaded.
GENLOCK x 1 A pair of Genlock signal connectors. Support Bi-Level and Tri-Level.
IN: accept the sync signal
LOOP: loop the sync signal
For standard Genlock signal generators, up to 20 MX20 devices can be cascaded.
AUX 1 An auxiliary port that connects to the central control device (RS232) (reserved).
Power
100-240 VAC, 50/60 Hz, 0.8 - 2 A . An AC power input connector and switch