60 W mixing amplifier with integrated FM tuner, MP3, USB, SD and Bluetooth audio source module
60 W 6-input, 6-zone amplifier / mixer for distributed audio systems (70 and 100 V) with built-in FM tuner with 16 preset stations and the ability to play MP3 or WMA audio sources from USB, SD card and Bluetooth. It also features outputs for low impedance speakers (4 and 8 ohm). It works at 240 VAC 50/60 Hz or at 24 VDC.
Main features
1 MIC input, 3 MIC / line inputs, 2 line only inputs
Volume adjustment of the 6 inputs, Master volume (front panel)
Bass / treble tone controls
RJ45 input for MP-6 paging microphone (rear panel)
One 6.3 mm jack connector for MIC 1 input (front panel)
Three balanced XLR MIC / line connectors for inputs 2, 3 and 4 (rear panel)
Two stereo RCA connectors for inputs 5 and 6
6 independent outputs for 6 zones on Euroblock terminal block
1 loudspeaker output (70/100 V or low impedance) on Euroblock terminal block
Record function: simple recordings can be made directly from inputs 1 to 3 on a USB stick or SD card. Note that the recording quality is limited to 32 kHz 128 kbps
Built-in Bluetooth module (TUB-3), stream audio from smartphone, tablet, PC or any other Bluetooth-enabled device
Thermal, overload and short circuit protection
Infrared remote control
Technical characteristics
Integrated sources
MP3 / USB / SD / tuner / Bluetooth
Power supply
110 - 240 VAC 50/60 Hz
Speaker output
70 and 100 V, 4, 8 and 16 ohm
Inputs / sensitivity
input: 0 dB / 20 kohm balanced
link: 0 dB / 20 kohm balanced
Frequency response
80 – 16,000 Hz
S/N ratio
70 dB
Consumption
100 W
Total harmonic distortion
< 0.5%
Protection and cooling
fan, thermal protection, overload and short-circuit