WP-1S - Bubble fog machine, Jet design, bubble and fog fluid storage in separately, LCD + DMX control
Ask for price
SKU: WP-1S
product.detail.ean: 0
Bubble fog machine, Jet design, bubble and fog fluid storage in separately, LCD + DMX control
The WP-1S bubble smoke machine is DJPOWER's first bubble blaster for shows, concerts, parties and events. It works on the basis of the patented jet design which creates many smoke-filled vivid bubbles with less smoke outside. Excess bubble liquid will flow into the waste container instead of falling to the ground. To protect the bubble liquid from deterioration and ensure high quality bubbles, the same is well stored in the tank. With this feature, the unit can also be mounted high in the truss, launching bubbles all over the sky.
Jet design, produces many smoke-filled bubbles
The well-designed heating system releases the fog evenly and purely, no fluid dropping off
The fan sends the smoke bubble higher and further
Separate liquid storage for bubbles and smoke
The bubble excess fluid will flow back into the waste fluid tank
LCD display on the back
3-pin & 5-pin DMX control
AC power
Input voltage & rate: 220 - 240 VAC 50/60 Hz
Current limiter type: breaker
Current limiter specifications: 8 A / 250 V
Total power consumption: 1500 W
Operating current: 6.5 A
Power input connector: lockable powerCON
Heating
Heat up time: appr. 4.5 min
Heater type: aluminum heater block
Light source
LED color: RGBA
LED type: single color
Power per LED: 5 W
Quantity of LED: 24 pcs.
Quantity of red: 6 pcs.
Quantity of green: 6 pcs.
Quantity of blue: 6 pcs.
Quantity of amber: 6 pcs.
Total power of LED: 120 W
Capacity
Fluid tank capacity: 1.3 L / 0.3 Gal.
Output
Max output volume: appr. 20,000 cuft/min
Max output distance: appr. 6.0 - 8.0 m
Fluid consumption @ full volume: appr. 100 mL/min
Maximum continuous duration @ full volume: appr. 15 s
Fully-loaded cumulative output duration @ full volume: appr. 13 min