Blackmagic 2110 IP Converter 3x3G - Device that convert 3 separate 3G-SDI devices to 2110 IP video systems, 3 separate video channels at the same time, reference output timed to the 2110 PTP clock, LCD for monitoring, menus and diagnostics
Device that convert 3 separate 3G-SDI devices to 2110 IP video systems, 3 separate video channels at the same time, reference output timed to the 2110 PTP clock, LCD for monitoring, menus and diagnostics
Convert three 3G-SDI devices into 2110 IP video systems thanks to the 10G Ethernet connection capable of managing 3 video channels simultaneously. All 3 channels can be sent via a simple 10G RJ45 Ethernet connection, so you can use common cheap CAT6 Ethernet cables. Each channel is equipped with independent SDI inputs and outputs, allowing you to connect 6 different SDI devices.
All 3G-SDI inputs have loop outputs allowing the converter to be installed in existing SDI systems. The reference output is synchronized to the PTP 2110 clock.
For monitoring, settings and diagnostics there is a color LCD display on the elegant front panel, from which you can even route IP inputs.
Technical characteristics
Connections
SDI inputs: 3
SDI loop outputs: 3
SDI outputs: 3
SDI audio inputs: 16 channels embedded audio
SMPTE 2110 input / output: 10G Ethernet supports 3 x video input channels and 3 x video output channels each up to 1080p 60 and up to 16 channels of embedded audio plus ancillary data
SDI metadata support: RP 188/SMPTE 12M-2 and closed captioning
Audio sampling: television standard sample rate of 48 kHz and 24 bit
Color precision: 8, 10 RGB 4:4:4 in all modes up to 1080p 30 and 8, 10-bit YUV 4:2:2 in all modes
Color space: REC 601, REC 709
IP video compliance
SMPTE 2110-20 (uncompressed video): IGMP v2
SMPTE 2110-21 (traffic shaping):
Sender: narrow
Receiver: narrow, wide synchronous, asynchronous
SMPTE 2110-30 (PCM): audio conformance level C
SMPTE 2110-40 (ancillary data): full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadata
Codec: Blackmagic IP10 codec used when converting 12G-SDI rates to 10G 2110 IP video
PTP (Precision Time Protocol): IEEE 1588-2008 (PTP v2), ST 2059-1, ST 2059-2
NMOS IS-04 discovery and registration: v1.3.2, peer-to-peer via mDNS/DNS-SD
NMOS IS-05 connection management: v1.1.2
NMOS BCP-002-01: natural grouping
NMOS BCP-004-01: receiver capabilities
Control
Built in control panel: 6 buttons with spin knob control and 2.2" color display for device control and menu settings
External control: RJ45 10 Gb/s Ethernet and USB-C
Display
Built in 2.2 inch LCD for video, video standard, audio and Time Code monitoring plus menu settings
Power requirements
Power supply: 1 x Internal 100 - 240 VAC 50/60 Hz
Power inputs: 1 x IEC C14 socket for AC power. 1 x RJ45 Ethernet connector for power from PoE power supplies
Power usage: TBA
Environmental specifications
Operating temperature: 5 to 40 °C
Storage temperature: -20 to 60 °C
Relative humidity: 0% to 90% non-condensing
Physical specifications
Dimensions: 14 x 4.6 x 22.8 cm
Weight: 1.049 kg
What's in the box
Blackmagic 2110 IP Converter 3x3G, welcome wallet with QR code for software download