Blackmagic 2110 IP Converter 4x12G PWR - 4 independent bidirectional 12G-SDI to SMPTE-2110 IP video converters, 1 RU design, control panel with LCD and supports HD and Ultra HD standards up to 2160p60
4 independent bidirectional 12G-SDI to SMPTE-2110 IP video converters, 1 RU design, control panel with LCD and supports HD and Ultra HD standards up to 2160p60
19” rack format converter designed to integrate SMPTE-2110 IP video into 12G-SDI broadcast equipment. This standard (SMPTE ST-2110) developed by SMPTE, defines the transport and synchronization of 10-bit video, audio and auxiliary data over broadcast IP networks intended to replace SDI (Serial Digital Interface).
Uses 4 independent 12G-SDI to SMPTE-2110 bidirectional IP video converters and 10G Ethernet RJ45 connections; this ensures fast power supply to each 10G Ethernet connection, for example to connect 4 Blackmagic Studio Camera 6K Pro simultaneously. Each channel has a 12G-SDI input, but there is also a 12G-SDI input for the return of the program that broadcasts on all channels.
It has 5 SDI inputs in total (4 SDI video + main PGM input), 4 SDI video outputs + 1 SDI Main Program Loop Out, 16 audio IN/OUT embedded on SDI. It includes PTP (Precision Time Protocol) clocking for precise synchronization between devices.
The addition of this converter to an existing professional SMPTE-2110 broadcast system offers the great advantage of being able to transform all video equipment into SMPTE-2110 at low cost: simply connect the device to live production switchers, recorders on disk, streaming processors, cameras, TVs and more. Using simple network cables you get the benefits of SMPTE-2110 IP video, remote power and bi-directional video, just like you would with an SDI workflow.
Features a dual internal 100 - 240 VAC 50/60 Hz power supply for redundancy.
Technical characteristics
Connections
Total SDI inputs: 5
SDI video inputs: 4
SDI main program inputs: 1
Total SDI outputs: 5
SDI video outputs: 4
SDI main program outputs: 1 loop out
SDI rates: 270 Mb, 1.5G, 3G, 6G, 12G
SMPTE ST-2110 IP video inputs: 4 x 10G Ethernet
SMPTE ST-2110 IP video outputs: 4 x 10G Ethernet
Analog audio outputs: 1 x 6.35 mm headphone socket
SDI audio inputs: 16 CH embedded audio on SDI input
SMPTE ST 2110 IP audio inputs: 16 CH embedded audio on ST-2110 IP video via 10G Ethernet
SMPTE ST 2110 IP audio outputs: 16 CH embedded audio on ST-2110 IP video via 10G Ethernet
Multi rate support: auto detection of SD, HD, Ultra HD and 4K
Reclocking: yes
Ethernet: 4 x 10 Gb/s RJ45 PoE++ connectors supporting 10/100/1000/10G BASE-T for SMPTE 2110 IP video in and out. PoE++ is power output only for powering connected PoE devices such as Blackmagic cameras and converters. 1 x 1 Gb/s RJ45 connector supporting 10/100/1000 BASE-T for configuration and firmware updates.
Computer interface: 1 x USB-C 3.0 for configuration and firmware updates
SDI video rates: SDI video connections are switchable between standard definition, 720p, 1080i, 1080p, 2K DCI, Ultra HD and 4K DCI
SDI color precision: 4:2:2
SDI color space: YUV
SDI auto switching: automatically detects SD, HD, 2K DCI, Ultra HD and 4K DCI. Level A and B is automatically detected on 3G-SDI input and user selectable on 3G-SDI output
IP video compliance
SMPTE 2110-20 (uncompressed video): IGMP v2
SMPTE 2110-21 (traffic shaping):
Sender: narrow
Receiver: narrow, wide synchronous, asynchronous
SMPTE 2110-30 (PCM): audio conformance level C
SMPTE 2110-40 (ancillary data): full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadata
Codec: Blackmagic IP10 codec used when converting 12G-SDI rates to 10G 2110 IP video
PTP (Precision Time Protocol): IEEE 1588-2008 (PTP v2), ST 2059-1, ST 2059-2
NMOS IS-04 discovery and registration: v1.3.2, peer-to-peer via mDNS/DNS-SD
NMOS IS-05 connection management: v1.1.2
NMOS BCP-002-01: natural grouping
NMOS BCP-004-01: receiver capabilities
Audio
Front panel audio monitor speaker with speaker control button, plus 6.35 mm headphone socket
Control
Built in control panel, 12 button control panel, 2.2” color display and spin knob for setup and menu settings
Operating systems
Mac 13.0 Ventura, Mac 14.0 Sonoma or later, Windows 10 and 11
Power requirements
Power supply: 2 x internal 100 ‑ 240 VAC 50/60 Hz with IEC C14 mains input
Power usage: TBA
Environmental specifications
Operating temperature: 5 to 40 °C
Storage temperature: -20 to 45 °C
Relative humidity: 0 to 90% non-condensing
Physical specifications
Dimensions: 48.3 x 4.4 x 23.4 cm
Weight: 3.7 kg
What's in the box
Blackmagic 2110 IP Converter 4x12G PWR, welcome wallet with QR code for software download