For add multiple microphones or external audio mixer sources on the ATEM Television Studio switchers
Now it’s easy to expand the MADI input on the ATEM Television Studio switchers to add multiple microphones or external audio mixer sources. The ATEM Microphone Converter simply plugs into the ATEM Television Studio MADI port, so there's no setup required and additional units can even be daisy chained for more sources. Each converter has 4 analog inputs that are mic/line selectable and have Phantom power. The design features amazing audio quality with an extremely low noise floor, a wide dynamic range and very low distortion. The design even uses 8 separate ADC on each separate input that work together to extend dynamic range! There is also an HDMI monitoring output with scrolling audio waveforms.
Connections
Analog Audio Inputs: 4 x Combination 3-pin XLR and TRS 1/4 inch Jack switchable between +24 dB line and mic level with support for +48 V Phantom power.
MADI Inputs: 1 x BNC supports 64 channel MADI digital audio
MADI Outputs: 1 x BNC supports 64 channel MADI digital audio
HDMI Video Outputs: 1 x monitor out.
Computer Interface: 1 x USB-C with locking screw
Ethernet: Supports 10/100/1000 BASE‑T.
HDMI Output Standards
HD Video Standards: 1080p24, 1080p25, 1080p30, 1080p48, 1080p50, 1080p60
HDMI Monitoring: Displays ATEM Microphone Converter name and 4, 8, 12 or 16 audio channels with 60 second waveform history. Also includes individual channel name, VU meters, mic or line level setting and Phantom power status.
Audio
ADC Per Input: 8
Digital Preamp: 32-bit
Dynamic Range: 131 dB(A)
Noise Floor: -129 dBV
Total Harmonic Distortion at full scale: 0.002%
Output Sample Depth: 24-bit
Output Sampling Rate: 48 kHz
MADI Compliance: AES10-2020
Power Requirements
Power supply: 1 x External 12 V power supply with locking connector.