BNC cable jack for panel mount, isolated, Pin 1,6 mm, Shield 6,47 mm
BNC cable jack for panel mount, isolated. Neutrik's BNC cable jacks for panel mount offer a true 75 ohm design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.
Suitable cables: Belden 1505A, Belden 8241F, Canare L4CFB, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801 (803, 804), Gepco VPM2000, Suhner S04263, Sommer 600-0451
Crimp size:
- Pin: 1.6 mm (square)
- Shield: 6.47 mm (hex)
Features & Benefits
- Gold plated center contact
- True 75 ohm design meets the stringent HD requirements
- Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
Product
- Title NBNB75ILP9
- Connection Type BNC 75 ohm
- Gender female
Electrical
- Contact resistance ≤ 3 m ohm (inner)
- Contact resistance ≤ 2 m ohm (outer)
- Dielectric strength 1,5 kVDC
- Impedance 75 ohm
- Insulation resistance > 5 Gohm
- Rated voltage <50 V
- VSWR ≤1.050/>32 dB up to 1 GHz
- ≤1.065/>30 dB up to 2 GHz
- ≤1.100/>26 dB up to 3 GHz
Mechanical
- Cable O.D. 4 - 7.7 mm
- Cable retention > 30 N (Center)
- Crimp size 6,47 Hex crimp (shield) acc. IEC 60803 (die designation E)
- Crimp size (pin) 1,6 Square crimp (pin) acc. IEC 60803 (die designation 2)
- Insertion force < 25 N
- Lifetime > 1000 mating cycles
- Wiresize
- Locking device Bayonett
- Mounting direction Rear mounting
- Chassis shape 12.7 mm
- Cable anchoring Jacket crimping
Material
- Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (Center contact)
- Insert PTFE
- Shell Brass (CuZn39Pb3)
- Shell plating Optalloy®
Environmental
- Temperature range -30 °C to +85 °C
- Contact crimpability Complies with IEC 60803 and IEC 60352-2
- Suitable cables: Belden 1505 A, Belden 8241F, Canare L4CFB, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801 (803, 804), Gepco VPM2000, Suhner S04263, Sommer 600-0451.