BNC 75 ohm Cable Connector, RearTWIST UHD series, Pin 1,07 mm, Shield 4.53 mm
The rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.
To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below.
- Pin: 1.07 mm
- Shield: 4.53 mm
Suitable cables:
- Belden 1855A, CommScope 7538
UHD optimized cables:
- Belden 4855P, Belden 4855R, ClarkWire CD7523, Gepco VDM230
- Optimized contact pin and insulator design for UHD-data transmissions
- Proven rearTWIST technology
- Swiss antraloy plating
- Fully compatible with conventional BNC chassis connectors
- Improved return loss values at high frequencies
- Pin: 1.07 mm
- Shield: 4.53 mm
Electrical
- Contact resistance ≤ 3 m ohm (inner)
- Contact resistance ≤ 2 m ohm (outer)
- Dielectric strength 1.5 kVDC
- Impedance 75 ohm
- Insulation resistance > 5 Gohm
- Rated voltage < 50 V
- VSWR ≤1.06 / >30 dB up to 6 GHz
- ≤1.13 / >24 dB up to 12 GHz
- ≤1.22 / >20 dB up to 18 GHz
Mechanical
- Cable O.D. 4.3 mm
- Cable retention > 30 N (center)
- Crimp size 4.53 Hex crimp (shield)
- Crimp size (pin) 1.07 crimp
- Insertion force < 25 N
- Lifetime > 1000 mating cycles
- Wiresize
- Locking device Bayonett
- Cable anchoring Jacket crimping
Material
- Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (center contact)
- Shell Brass (CuZn39Pb3)
- Shell plating Antraloy
- Insert PP
Environmental
- Temperature range - 30 °C to +85 °C
- Contact crimpability Complies with IEC 60803 and IEC 60352-2
English 
French
