EtherCON CAT6A cable connector self-termination, for insulation diameter > 1.1 mm, nickel plating
The set NE8MX6 consists of a cable plug carrier offering a robust metal shell, proven Neutrik chuck-type strain relief and a CAT6A compliant RJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and wire gauge of AWG24/1 - AWG22/1 (solid) or AWG24/7 - AWG22/7 (stranded).
Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
If the insulation diameter is ≤ 1.1 mm please refer to NE8MX6-T.
- Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
- PoE++ compliant according to 802.3bt Type4
- IP65 protected when mated with NE8FDX-P6- W or NE8FDX-Y6- W
- Rugged latch lock system million fold proven
- Intermateable with the existing etherCON CAT5 range
- Unique Neutrik chuck-type strain relief
Electrical
- Dielectric strength 1 kVDC
- Insulation resistance > 0.5 Gohm
- Rated current per contact 1.5 A
- Transmission performance CAT6 A, acc. TIA/EIA rating
- CAT6 A, acc. IEC/ISO/EN rating
- Power over Ethernet PoE++ acc. IEEE 802.3bt
Mechanical
- Cable O.D. 7.0 - 9.5 mm
- Lifetime > 1000 mating cycles
- Wiresize AWG 24/1 - AWG 22/1 (solid)
- AWG 24/7 - AWG 22/7 (stranded)
- Locking device Latch lock
- Insulation diameter 1.1 - 1.6 mm
Material
- Bushing PA / PU
- Contact plating Au
- Shell Zinc diecast (ZnAl4Cu1)
- Shell plating Nickel
- Strain relief POM
Environmental
- Protection class IP 65 (in combination with NE8FDX-*6-W)
- Temperature range -40 °C to +70 °C
English 
French
