16 x 16 Pre-Amp Audio DSP Matrix - Remote Source (RS) kit
ProAudio 16 RS is a new version of the popular ProAudio 16 audio matrix switcher, with the added flexibility of supporting 8 digital inputs located up to 200 m away (remote source) over one CAT5e/6 cable. For the rest, the characteristics are the same as the ProAudio16.
Each output zone can be processed with built-in features including 5-band EQ on each zone, adjustable volume and gain settings, subwoofer control, serial and TCP/IP control, lip sync delay, and much more. In many cases, the need for an audio receiver can be eliminated by using the audio capabilities of the ProAudio series.
In this KIT version, 8 audio extender transmitters are included.
Technical characteristics
Audio inputs: 48
Stereo L/R audio inputs: 16
Optical audio inputs: 8
Remote source (RJ45) inputs: 8
Digital coax audio inputs: 16
Audio outputs: 16
Stereo L/R audio outputs: 16
Optical audio outputs: 16
12 V triggers: 0
Audio tansmitters included: 8
Serial control: yes, RS232
TCP/IP control: yes
Third party control: yes, drivers available
Lip sync delay: up to 170 ms per zone
Volume adjustments: 20 dB to +20 dB, 0.5 dB steps
Equalizer: 5 band EQ per zone
Subwoofer control: yes
Treble: -20 dB to +20 dB, 0.5 dB steps
Input gain control: 24 dB to +24 dB
Output gain control: -24 dB to +24 dB
Doorbell / paging inputs: 2
Supported formats: PCM, Dolby Digital 5.1, DTS
Coax input levels: 200 mV - 7.0 V (PC card compatible)
Coax output level: 500 mV nominal into 75 ohms
Freq. response: 5 Hz - 20 kHz @ ±0.1 dB
S/N ratio: > 85 dB, 5 Hz - 20 kHz
Input impedance: 10 kohms
Power supply: IEC C14 input – 110 – 240 VAC, 1.0 A, 50/60 Hz
Material: brushed aluminium (anodised)
Product dimensions: 44 x 8 x 22 cm - 2U
Product weight: 2 kg
Operating temp. range: -10 to +70 °C (14 to +158 °F)
Storage temp. range: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity range 5 to 90% RH (no condensation)
Safety & Emissions: UKC A, CE, FCC, RoHS
Manufactured in Great Britain by Pulse-Eight
English 
French
