AxC-AS16Mv2 - High density MIC / line card with 16 IN on 2 x DSUB DB25

126_agora_small.jpg

€ 3.542,70

SKU: AxC-AS16Mv2 EAN: 0

High density MIC / line card with 16 IN on 2 x DSUB DB25

High density MIC / Line card with 16 IN on 2 x DSUB DB25.

Must be inserted into the available slot on the rear panel of the Agora H1 to build the audio bridge. Just like every AxC card within the Audio ToolBox range, the AxC-AS16M can also be used in the AVBx3 or AVBx7 platforms. Using only one slot of the Audio ToolBox, the AxC AS16M provides 16 high quality MIC / Line inputs (both line and microphone level) with an incredible density for the AuviTran Audio ToolBox platform.

AxC-AS16M applications

Suitable for all professional applications that require a large number of high quality MIC / line inputs in a small size:

  • Ability to connect and pre-amplify many high performance microphones or line sources. High-class A/D conversion chip and excellent circuit design
  • These cards set new standards of quality, price and channel density for professional audio applications
  • The attenuation / gain settings and VU-meters can be controlled and monitored individually per channel via network for remote management from virtually anywhere using AVS-Monitor via IP, Dante, AVB or EtherSound networks
  • Individual gains and remote controls of Phantom +48 V activation are managed by the Yamaha HA remote protocol, allowing direct control and monitoring from the Yamaha console / mixer
  • Dedicated control page to monitor and control all card parameters (gain, Phantom power on each channel, preamp values, VU-meter)

Main features

  • High-density card for 16 MIC / line inputs
  • 16 balanced MIC / line + high-quality preamps
  • Input sensitivity from +24 dBu to -56 dBu
  • Analog gain range: 0 to +80 dB (with 0.5 dB increments)
  • E.I.N.: < -126 dBu
  • Dynamic range: > 115 dB
  • THD+N: < -90 dB
  • Phantom power +48 V, individually controllable for each input
  • 2 x Sub-DB25 female connectors
  • A 0.5 dB linear step digital gain / attenuator provides access to an input sensitivity of -56 dBu to +24 dBu
  • Activation of Phantom power +48 V per channel, preamp gain setting

Technical characteristics

General

Size 200 x 100 x 40 mm – AuviTran Audio ToolBox platform cards format
Power supply +12 V / +3.3 V through AuviTran Audio ToolBox backplane 
Storage (temp / humidity)  -5 to 70 °C / 0 to 95% (non-condensing) 
Operating (temp / humidity)  0 to 50 °C / 5 to 90% (non-condensing)
Connectors  2 x or 1 x female DB25 connectors (Yamaha pinout) - Optional: DB25 to Euro-Block plug available

 

Audio inputs 

Number of inputs AxC-AS16M: 16 MIC / line inputs
AxC-AS8M: 8 MIC / line inputs

 

Audio inputs specifications

Sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz or 96 kHz 
ADC resolution 24 bits
Input specification   balanced MIC / line
Input maximum level  +24 dBu 

 

Audio inputs MIC / line  

Analog gain range 0 to +80 dB (0.5 dB step)
Input sensibility +24 to -56 dBu
Input impedance 2,7 kohm (differential)
E.I.N. @ (Rs = 150 ohm, G = +80 dB)  -126 dBu
Dynamic range  > 115 dB A-weighted (> 112 dB un-weighted)
THD+N (1 kHz) < -90 dB
Frequency response 20 Hz – 20 kHz ±0.2 dB
Phantom power +48 V (individually controllable for each channel)

 

Integration environment

Audio ToolBox platform AxC-AS16M / AxC-AS8M are cards for the AuviTran Audio ToolBox platform
AVS-Monitor AVS-Monitor enables to remotely set, control and monitor an IP, Dante, AVB network and provides enhanced control pages to manage the AxC-AS8M / AxC-AS16M card specific parameters.
OS supported Windows 10 for 32-64-bit versions
126_agora_small.jpg

€ 3.542,70

Tax excluded SKU: AxC-AS16Mv2 EAN: 0