GHOST MK2 with 2 x 1 Gbit transmit ports - F.O. DUAL opticalCON single-mode (on front panel) + 2 x 1 Gbit transmit ports - F.O. DUAL opticalCON multi-mode (rear panel).
Technical characteristics
Connectivity & interface
| Front panel | 10 x 10 Base-T / 100 Base-TX / 1000 Base-T etherCON 10 x 8 caracters LCD sceens 2 x 1000 or 10,000 Mbps opticalCON DUAL ports 2 LEDs (Status-Traffic, ID) on each port 1 x configuration and navigation function switch |
| Rear panel | 4 x 10 Base-T / 100 Base-TX / 1000 Base T-etherCON ports 2 x 1000 or 10,000 Mbps opticalCON DUAL ports 2 x IEC power sockets (internal redundant power supply) |
| Software | SNMPv3 & SSH remote protocol Emulate Mode |
Processing
| Mother board | 1 x Marvell 98DX Data flow : up to 95.23 Mbps Switching capacity: 128 Gb |
| Network | 250 x groups available 16000 MAC Address capacity IEEE 802.1p traffic priority |
General
| Power consumption | 100 - 127 VAC 0.6 A, 200 - 240 VAC 0.4 A |
| Power supply | 100 - 240 VAC 50/60 Hz |
| Idle power (1) | 19.5 W |
| Maximum power rating (2) | 26.6 W |
| Thermal dispersion (without options) | 80.36 BTU/h (110 V 60 Hz) |
| Storage temp. / humidity | -40 to 70 °C / 5 - 90% without condensation |
| Operating temp. / humidity | 0 to 45 °C / 10 - 90% without condensation |
| Altitude | Up to 3 km |
| Operating noise | Without fan |
| Size (W x D x H) | 482.60 x 368 x 43.60 mm |
| Weight (without options) | 1.7 kg |
1 - Idle power is the actual power consumption of the device with no ports connected
2 - Maximum power
English 
French
