H1 + redundant power supply option - 10 / 16 A
Connectivity & Interface
Front panel | 3 x 10 Base-T / 100 Base-TX / 1000 Base-T etherCON ports with LCD screens 1 x 10 Base-T / 100 Base-TX/ 1000 Base-T etherCON ports 2 x Internal port connected to the Audinate Dante primary & secondary interfaces 3 LEDs (Statut, traffic, ID) on each etherCON User port 2 LEDs (Statut et traffic) on each opticalCON & etherCON transmit port 1 x Configuration and navigation function switch |
Rear panel | 1 x 10 Base-T / 100 Base-TX / 1000 Base-T RJ45 ports 1 x AxC‚ Auvitran slot 2 x power cord (redundant power supply) |
Software | Web service for switch board control Switch, Audio matrix and interface cards remote is available on Auvitran AVS Monitor software AudinateTM Brooklyn II control and monitoring is available on Audinate Dante controller software Service and maintenance window |
Processing
Switch mother board | 99 x available groups Capacity of 2 x 8K MAC Address IEEE 802.1p Qos |
Network capacity | 99 x available groups Capacity of 8K MAC Address IEEE 802.1p Qos |
Audio matrix | 128 x 128 audio channels @ 48 kHz Internal slot: up to 64 x 64 audio channels @ 48 kHz External slot: up to 64 x 64 audio channels @ 48 kHz Network streaming capacity: up to 64 x 64 audio channels @ 48 kHz / 32 simultaneous streams Dante / AES67 Clocking : two onboard oscillators‚ Dante / Internal‚ software switchable |
GENERAL
Size (W x D x H) | 220 x 433.9 x 43.3 mm (without accessoires) |
Weight (without options) | 3.8 kg |
Power consumption | 100 - 127 VAC 0.5 A, 200 - 240 VAC 0.25 A |
Power supply | 100 - 240 VAC 50/60 Hz |
Idle power* | 25 W |
Maximum power rating* | 50 W |
Storage temperature / humidity | 70 °C > T > -40 °C / 90% > H > 10% without condensation |
Operating temperature / humidity | 40 °C > T > 0 °C / 90% > H > 10% without condensation |
Altitude | up to 10,000 ft (3 km) |
Acoustic | Fanless |
Package
Package includes | 1 x H1 engine 1 x IEC13 lock power cord 1 x USB stick with Software, firmware and owner‚ documents 20 x M3 screw 1 x removable short angle bracket 1 x removable long angle bracket 2 x removable wall-mount bracket (OPTION) 1 x M10 removable plate (OPTION) 1 x 5030-B Truss clamp (OPTION) 2 x linking plate |