AM 20N - Preamplifier / amplifiers 20 W, 4 Inputs, 8 ohm, 25 / 70 / 100 V - 220 - 240 V AC / 12 V DC

Preamplifier / amplifiers 20 W, 4 Inputs, 8 ohm, 25 / 70 / 100 V - 220 - 240 V AC / 12 V DC

Main features

• 1 balanced DIN/jack/XLR microphone input MIC 1 (priority) via Talk Over or remote control
• 1 balanced microphone input (jack/XLR) MIC 2. These 2 inputs can be switched to Phantom-powered microphone (internal operation), a chime (2 tones "ding dong") can be activated by the MIC 1 microphone connected to the 5-pin DIN socket (RONDSON PA 100D call station) or to the stereo jack socket on the front panel (PA 100J call station).
• 1 telephone input, super priority emergency message
• 2 RCA AUX input (tuner, CD, etc.)
• 1 modulation output for connection of a power unit

Type	amplifier / preamplifier
Power supply	115 - 230 VAC 50/60 Hz - switchable ±10%. 12 VDC (maximum deviation 10%)
Output power	20 WRMS 30 W max.
Speaker outputs	8 ohm - 25 / 70 / 100 V
Line Output	1 V, 600 ohm
Inputs	MIC 1 - 2: 1 mV, 250 ohm symmetrical power supply. configurable Phantom power supply AUX: 200 mV, 47 kohm asymmetrical TEL: 0.1 to 1 V, 600 ohm, symmetrical, adjustable
Frequency response	MIC 1 - 2: 60 - 15,000 Hz ±3 dB AUX: 60 - 15,000 Hz ±3 dB TEL: 100 - 15,000 Hz ±3 dB
Total harmonic distortion	less than 1% at 1 kHz at RMS power
S/N ratio	All CCN volume settings: 75 dB below nominal power MIC 1 - 2: 60 dB below RMS power AUX: 70 dB below RMS power TEL: 70 dB below RMS power
Tone Settings	Bass: ±10 dB at 100 Hz - Treble: ± 10 dB at 10 kHz
Settings	MIC 1 - 2: volume control AUX: volume control - Tone: bass and treble TEL: entry level CHIME: inter ON/OFF 115 - 230 V: voltage switch
Display	Power on indicator light
Consumption	Mains: 100 W Battery: 4 A
Chime	2 tone Ding Dong preceding 1 microphone call
Priority	By detection / MIC 1 connected to DIN or jack
Priority levels	TEL/EMER &nbsp MIC 1 &nbsp MIC 2 &nbsp AUX &nbsp &nbsp &nbsp &nbsp &nbsp 3 &nbsp &nbsp &nbsp &nbsp &nbsp &nbsp &nbsp 2 &nbsp &nbsp &nbsp &nbsp &nbsp 1 &nbsp &nbsp &nbsp &nbsp &nbsp 1
Dimensions (W x D x H)	272 x 300 x 88 mm
Weight	5.7 kg
Option 19" rack mounting 2 U	Mounting brackets EQ 2040