AM 30A - Preamplifier / amplifiers 30 W, 6 Inputs, 8 ohm, 25 / 70 / 100 V - 220 - 240 V AC / 24 V DC

Preamplifier / amplifiers 30 W, 6 Inputs, 8 ohm, 25 / 70 / 100 V - 220 - 240 V AC / 24 V DC

Main features

• 1 balanced DIN/jack/XLR microphone input MIC 1 (priority) via Talk-Over or remote control
• 2 balanced microphone inputs (jack/XLR), MIC 2 and MIC 3. These 3 inputs are switchable to Phantom power (internal intervention), MIC 3 switchable to line, an acoustic signal (2 "ding dong" tones) can be activated by the MIC 1 microphone inserted into the 5-pole DIN socket (PA 100D microphone station) or into the stereo jack socket on the front panel (PA 100J console)
• 1 telephone input, emergency message, super priority
• 2 AUX RCA inputs (tuner, CD, etc.)
• 1 input and output for equalizer or amplifier
• 1 recording output
• Speaker outputs on terminal block BI 8 ohm, HI 25, 70 or 100 V
• Cooling fan

Power supply	115 - 230 VAC 50/60 Hz ±10% - switchable 24 VDC (maximum deviation 10%)
Output power	30 WRMS 45 W max.
Speaker outputs	8 ohm - 25 / 70 / 100 V
Output recording - TAPE	350 mV, 4.75 kohm
Line output - PRE OUT	1 V, 600 ohm
Inputs	MIC 1 to 3: 1 mV, 250 ohm symmetrical Phantom powering configurable AUX 1: 200 mV, 47 kohm, asymmetrical AUX 2: 500 mV, 47 kohm, asymmetrical Line (MIC 3): 200 mV, 47 kohm, symmetrical TEL: 0.1 to 1 V, 600 ohm, symmetrical, adjustable Power in: 1 V, 47 kohm, asymmetrical
Frequency response	MIC 1 - 3: 60 - 15,000 Hz ±3 dB AUX 1 - 2: 60 - 15,000 Hz ±3 dB TEL: 100 - 15,000 Hz ±3 dB
Total harmonic distortion	less than 1% at 1 kHz at RMS power
S/N ratio	All CCW volume settings: 75 dB below rated power MIC 1 to 3: 60 dB below RMS power AUX 1 - 2: 70 dB below RMS power TEL: 70 dB below RMS power
Tone settings	Bass: ±10 dB at 100 Hz - Treble: ± 10 dB at 10 kHz
Settings	MIC 1 to 3: volume control AUX 1 - 2: volume control MASTER volume control Tone control: bass and treble TEL: input level MIC 3 (line/MIC): switch CHIME: inter ON/OFF 115 - 230 V: voltage switch
Consumption	Sector: 90 W Battery: 2 A
Chime	2 tones Ding Dong preceding 1 microphone call
Priority	by detection / MIC 1 connected to DIN, jack or XLR
Priority levels	TEL/EMER : 3 - MIC 1: 2 - MIC 2: 1 - AUX/CD:1
Dimensions (W x D x H)	430 x 260 x 88 mm
Weight	6.5 kg
Option montage rack 19" 2 U	mounting brackets EQ 2000