Main features
All three inputs can be switched to phantom powered microphones (internal operation), MIC 3 can be switched online, a beep (2 "ding dong" tones) can be triggered from the MIC 1 microphone connected to the DIN socket 5 poles (PA 100D Call Microphone Panel) or to the stereo socket on the front panel (PA 100J Panel).
Type |
amplifier / preamplifier |
Power supply |
115 - 230 VAC 50/60 Hz ±10% - switchable 24 VDC (maximum deviation 10%) |
Output power |
240 WRMS |
Speaker outputs |
8 ohm - 25 / 70 / 100 V |
Output recording - TAPE |
350 mV, 4.75 kohm |
Line output - PRE OUT |
1 V, 600 ohm |
Inputs |
MIC 1 to 3: 1 mV, 250 ohm symmetrical Phantom powering configurable AUX 1: 200 mV, 47 kohm, asymmetrical AUX 2: 500 mV, 47 kohm, asymmetrical Line (MIC 3): 200 mV, 47 kohm, symmetrical TEL: 0.1 to 1 V, 600 ohm, symmetrical, adjustable Power in: 1 V, 47 kohm, asymmetrical |
Frequency response |
MIC 1 - 3: 60 - 15,000 Hz ±3 dB AUX 1 - 2: 60 - 15,000 Hz ±3 dB TEL: 100 - 15,000 Hz ±3 dB |
Total harmonic distortion |
less than 1% at 1 kHz at RMS power |
S/N ratio |
All CCW volume settings: 75 dB below rated power MIC 1 to 3: 60 dB below RMS power AUX 1 - 2: 70 dB below RMS power TEL: 70 dB below RMS power |
Tone Settings |
Bass: ±10 dB at 100 Hz - Treble: ± 10 dB at 10 kHz |
Settings |
MIC 1 to 3: volume control AUX 1 - 2: volume control MASTER volume control Tonality: bass and treble TEL: input level MIC 3 (line/MIC): switch CHIME: inter ON/OFF 115 - 230 V: voltage switch |
Consumption |
Power supply: 720 W Battery: 16 A |
Chime |
2 tones Ding Dong preceding 1 microphone call |
Priority |
By detection / MIC 1 connected to DIN, Jack or XLR |
Priority levels |
AUX/CD 1 |
Dimensions (W x D x H) |
430 x 260 x 88 mm |
Weight |
13 kg |
Option montage rack 19" 2 U |
mounting brackets EQ 2000 |