70 W active column speaker with Class-D amp, integrated Dante module and PoE, intended to offer a network-connected audio solution.
Powered by a single network cable (Ethernet cable, CAT5 or more) simplifies installations compared to traditional speakers. It is also compliant with the IP/IT protocols of most buildings.
The columns can be mounted both indoors and outdoors (with optional waterproof rear connector).
Areas of use
Technical characteristics
| Type | loudspeaker POE class D 70 W - Dante |
| Driver | 4 x 3 Y35 magnet full range cone speaker |
| Sensitivity | 92 dB/W/m |
| Frequency response | 150 Hz - 18 kHz |
| Max. SPL | 111 dB |
| Angle dispersion (H x V) | 90° x 30° |
| Power handling | 70 W |
| Audio input | Dante (Ultimo2) |
| Audio routing | Dante control software |
| Amp technology |
Class-D |
| Protections | thermal, overload and short-circuit protection |
| Transmission speed | 100 Mbps |
| Input connector | RJ45 |
| POE cable type | CAT5 or higher |
| Safety standards | IEEE802.3af and IEEE802.3at, CE, UL (or ETL, TVU), C-TICK, FCC, CCC |
| Dimensions (W x D x H) | 41 x 10.5 x 12 cm |
| Weight | 3.2 kg |
English 
French
