240 W mixing amplifier with integrated FM tuner, MP3, USB, SD and Bluetooth audio source module
240 W 6-input, 6-zone amplifier / mixer for distributed audio systems (70 and 100 V) with built-in FM tuner with 16 preset stations and the ability to play MP3 or WMA audio sources from USB, SD card and Bluetooth. It also features outputs for low impedance speakers (4 and 8 ohm). It works at 240 V
AC 50/60 Hz or at 24 V
DC.
Main features
- 1 MIC input, 3 MIC / line inputs, 2 line only inputs
- Volume adjustment of the 6 inputs, Master volume (front panel)
- Bass / treble tone controls
- RJ45 input for MP-6 paging microphone (rear panel)
- One 6.3 mm jack connector for MIC 1 input (front panel)
- Three balanced XLR MIC / line connectors for inputs 2, 3 and 4 (rear panel)
- Two stereo RCA connectors for inputs 5 and 6
- 6 independent outputs for 6 zones on Euroblock terminal block
- 1 loudspeaker output (70/100 V or low impedance) on Euroblock terminal block
- Record function: simple recordings can be made directly from inputs 1 to 3 on a USB stick or SD card. Note that the recording quality is limited to 32 kHz 128 kbps
- Built-in Bluetooth module (TUB-3), stream audio from smartphone, tablet, PC or any other Bluetooth-enabled device
- Thermal, overload and short circuit protection
- Infrared remote control
Technical characteristics
|
|
MP3 / USB / SD / tuner / Bluetooth
|
|
|
|
|
|
70 and 100 V, 4, 8 and 16 ohm
|
|
|
input: 0 dB / 20 kohm balanced
link: 0 dB / 20 kohm balanced
|
|
|
|
|
|
|
|
|
|
Total harmonic distortion
|
|
|
|
fan, thermal protection, overload and short-circuit
|
| Dimensions (W x D x H) |
|
| Weight |
|
English 
French
