USB ONE - USB 2.0 to DMX-512 Interface, 1 x DMX-IN / OUT

€ 254,40

SKU: IA-HW-001001

Ask for availability To find out the price dedicated to you, follow the link and register on audioeffetti.com. Our office will contact you as soon as possible.

USB 2.0 to DMX-512 Interface, 1 x DMX-IN / OUT

USB ONE is a USB 2.0 > DMX-512 interface cable with 1 x DMX-IN / OUT. This is one of the smallest USB interfaces for DMX input or output on the market.

It allows to control 512 DMX channels using MADRIX software and is primarily intended for DMX input. A MADRIX KEY (software licensed) is required to activate the DMX output and a 3 or 5 pin-male to male XLR adapter.

Technical characteristics

DMX-IN / OUT with 5-pin Neutrik XLR port: this device allows you to send or receive DMX data using 512 DMX channels. A male to male 3-pin or 5-pin XLR adapter is required for DMX-IN
USB 2.0 standard: the USB 2.0 standard is fully supported to allow for a higher maximum speed of 480 MBit/s
Power over USB: the interface is powered directly via the USB port and does not need an additional power supply
High quality: the USB ONE represents high quality made in Germany and is very reliable
Hot swapping and Plug & Play: devices can be connected to and disconnected from the computer during use and without a reboot
Remote control: MADRIX software can be controlled remotely using the implemented DMX-IN functions
Frame rate stability: up to 60 devices can be connected to a USB host controller without having any frame rate problems (60 DMX-512 interfaces amount to 30,720 DMX channels)
Active USB: please connect every USB ONE to an active USB 2.0 port or use a USB 2.0 hub with a power supply

€ 254,40

SKU: IA-HW-001001

Ask for availability To find out the price dedicated to you, follow the link and register on audioeffetti.com. Our office will contact you as soon as possible.