Bubble fog machine, 6 x 8 W RGBY LED, 2 fans, built-in LCD and DMX control
WP-2 is the first bubble machine produced by DJPOWER. It is based on a patented jet design that blows many vivid smoke-filled bubbles with less smoke outside. It also features 6 x 8 W RGBY LEDs, two fans to make the smoke bubble fly higher and further, built-in LCD control, 3-pin & 5-pin DMX control and stores bubble and smoke liquid in two separate tanks. To prevent the bubble liquid from degrading and thus ensure high quality bubbles, the same is well stored in the tank. Excess fluid will flow into the holding tank instead of falling to the floor. With this feature, the unit can also be mounted hanging, shooting bubbles everywhere.
- Jet design, produce lots of bubbles filled with fog
- Well-designed heating system releases the fog evenly and purely, no fluid dropping off
- Two fans make the fog bubble fly higher, further
- Bubble and fog fluid storage in separately
- The excess bubble fluid will flow back to waste fluid tank
- Combining with Led light
- Built-in LCD control, 3-pin and 5-pin DMX control
|
Input voltage
|
220 - 240 VAC 50/60 Hz |
|
Breaker
|
5 A / 250 V |
| Total power consumption |
650 W |
| LED power |
8 W × 6 pcs |
| LED color |
RGBY |
| Heat-up time |
appr. 3 min |
| Max output volume |
appr. 4,500 cfm |
| Max output height |
appr. 4 m |
| Max output distance |
appr. 3.5 m |
| Haze fluid consumption rate |
appr. 78 min/L |
| Bubble fluid consumption rate |
appr. 26 min/L |
| Bubble tank capacity |
2.8 L |
| Haze fluid tank capacity |
1.3 L |
| DMX channel |
12 |
| Net weight |
14.5 kg |
| Gross weight |
17 kg |
| Machine dimensions |
426 x 317 x 394 mm |
| Packing dimensions |
535 × 435 × 500 mm |
| Consumables |
PRO-P and PRO-C |
English 
French
