tarm 6 OUTDOOR - Tarm laser - 6000 mW guaranteed output power - OUTDOOR with ShowNET

Tarm laser - 6000 mW guaranteed output power - OUTDOOR with ShowNET

Tarm 6 OUTDOOR is a 6000 mW RGB laser with full analog color modulation and pure diode light source specially designed for outdoor installations.

Unlike the standard tarm 6, it features a waterproof housing that not only protects the components inside from water, but also protects against direct heat from sun exposure. A specially designed roof in front of the exit window prevents it from being hit by direct rain.
To cope with temperature variations, the tarm 6 OUTDOOR is equipped with an active water cooling system, integrated into the housing. An active heating system, on the other hand, helps keep laser systems operational even at low temperatures. Therefore, this appliance can be used at ambient temperatures between -10 °C and +45 °C. An upgrade of the CT scanner with the Turboscan LAS drivers for tarm 6 OUTDOOR is available for higher quality graphical results.

This laser is the perfect all-rounder for professional users and lighting designers. It has has a built-in network DAC for Showcontroller and Showeditor, but can also be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). It also has built-in memory with preset patterns, which can be easily triggered via DMX and auto mode.

Tarm 6 OUTDOOR comes with an integrated ShowNET network interface and free laser show software (Showeditor). Showcontroller software is also supported and can be purchased additionally. Two different DMX modes are available:

• DJ mode with the most used features by beginners. Only a few DMX channels are used for quick and easy access to the most important settings directly on the laser system
• Professional mode with full DMX functionality, especially for users with a DMX console. All adjustments can be activated and allow full control of the professional laser show.

The integrated ShowNET works as a DAC and allows for ILDA streaming. The maximum scan speed is very high, equal to 45 kpps @ 8° ILDA for graphic projection and allows a maximum scan angle of 50°; optionally it is possible to have a scanner CT-6210 with 60 kpps @ 8° ILDA and max. scan angle of 60°. High-precision diode arrays provide excellent beam divergence of less than 0.5 mrad for a small beam diameter. This laser is able to deliver beautiful colors, with good fading. It impresses with its very bright 2000 mW and 637 nm single mode red. We then have a 2000 mW green at 520 nm and a 2500 mW blue at 450 nm. The tarm 6's housing is built in a very robust and dust-resistant way, so there is no air circulation inside the case: this keeps maintenance to a minimum. The mounting bracket allows the laser system to be hung and vertically mounted.

Tarm 6 OUTDOOR is particularly suitable for outdoor laser applications, for fixed installations, advertising, mapping or any type of graphic projection.

• Guaranteed power at aperture: 6000 mW
• Power red: 2000 mW / 637 nm
• Power green: 2000 mW / 520 nm
• Power blue: 2500 mW / 450 nm
• Beam specifications: ca. 4.5 mm / <0.6 mrad
• Scanner: 45 kpps @ 8° ILDA; optional: CT-6210 with LAS Turboscan: 60 kpps @ 8° ILDA, max. 60°
• Max. scan angle: 50°
• Laser source: diode
• Laser class: 4
• Operation modes: LAN, ArtNet, ILDA streaming, integrated SD card, stand-alone
• Basic patterns: over 120 (layers, tunnels, fences, waves, etc.)
• Accessories: incl. power cable, manual, E-Stop, interlock connector, full version Showeditor software license included
• IP rating: IP65
• Power supply: 85 - 250 V_AC 50/60 Hz
• Power consumption: 300 W
• Dimensions: 800 x 370 x 260 mm
• Weight: 22 kg