CX80Pro v input card 1 - 8K LED display controller with input card 1 - HDMI 2.1+DP 1.4+12G-SDI×4

8K LED display controller with input card 1 - HDMI 2.1+DP 1.4+12G-SDI×4

The CX80 Pro is a flagship 8K LED display controller in the brand-new control system COEX series of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This controller offers rich video input connectors (HDMI 2.1, HDMI 2.0, DP 1.4 and 12G-SDI) and supports 5Gbps output via Ethernet port and 40Gbps remote transmission via optical port.

It can also work with the brand-new software VMP (Vision Management Platform) to provide a better operation and control experience. Based on modular design, the CX80 Pro uses pluggable cards that can be easily replaced and maintained. Besides, the CX80 Pro comes with a 5.5-inch touch LCD, making user operation and control much easier. 

Input Cards

• HDMI 2.1 x1
  • Resolutions 7680×4320@(60/50/48/30/25/24Hz) only
  • HDR: Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards. Support HLG.
  • EDID management: Support standard resolutions: 7680×4320@(60/50/48/30/25/24Hz). Do not support custom input resolutions. 
  • HDCP: HDCP 2.3 compliant, backwards compatible
  • Interlaced signal inputs: Not supported 
• DP1.4 x1
  • Resolutions: 7680×4320@(30/25/24Hz) only
  • HDR: Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards. Support HLG. 
  • EDID management Support standard resolutions: 7680×4320@(30/25/24Hz). Do not support custom input resolutions.
  • HDCP: HDCP 2.2 compliant, backwards compatible
  • Interlaced signal inputs: Not supported 
• 12G-SDI x4
  • Standards Support ST-2082 (12G), ST-2081 (6G), ST-424 (3G) and ST292 (HD) standard video inputs. Support 3G-Level A/Level B (DS mode).
  • Resolutions: Max resolution: 4096×2160@60Hz
  • HDR: Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards. Support HLG. 
  • Frame rates: Support frame rates up to 60 Hz.
  • Mosaic: SDI input sources support input mosaic.
  • Interlaced signal inputs: Not supported
  • Others: Belden 12G SDI standard cables are recommended. Cables up to 50 meters are supported.

Output Connectors

• Ethernet ports 1~16
  • 5Gbps Ethernet ports
    • Max device load capacity: 35,389,440 pixels
    • Max output width and height − Send-Only Controller mode: max width 32,768 pixels, max height 32,768 pixels − All-In-One Controller mode: max width 16,384 pixels, max height 16,384pixels
    • The maximum load capacity per port is as follows. For details, see the Ethernet Port Load Capacity section. − 8bit@60Hz: 2,592,000 pixels − 10bit@60Hz: 2,073,000 pixels 
• Optical ports 1~2
  • 40Gbps optical ports The maximum load capacity per optical port equals to that of 8x 5Gbps Ethernet ports. - 1 corresponds to Ethernet ports 1~8. - 2 corresponds to Ethernet ports 9~16.
• SPDIF OUT  : A digital audio output (Reserved)

Control Connectors

• ETHERNET x2: Gigabit Ethernet control ports. Support TCP/IP protocol and star topology. They have the same functions without priority and order, and can be connected to VMP software. No switch or router is needed to deploy multiple devices on the same LAN via device cascading as the network switching function is already built in. Up to 20 CX80 Pro devices can be cascaded.
• GENLOCK x1: A pair of Genlock signal connectors. Support Bi-Level and Tri-Level. - IN: Accept the sync signal. - LOOP: Loop the sync signal. For standard Genlock signal generators, up to 20 CX80 Pro devices can be cascaded. 
• AUX x1: An auxiliary port that connects to the central control device (RS232) (Reserved) 

Power

• 100-240V~, 50/60Hz, 4A: An AC power input connector and switch