H_4×OPT sending card - Output card for H15 and H20: 4 x 10G OPT. Supports SFP single-mode and multi-mode

40_01_small.jpg

£ 4.658,35

SKU: H4XOPTOUT EAN: 0

Output card for H15 and H20: 4 x 10G OPT. Supports SFP single-mode and multi-mode

Output card for Video wall splicer H15 and H20 with 4 OPT 10G optical ports. It can load up to 20,800,000 pixels (maximum width 16,384 pixels, maximum height 16,384 pixels). Single and multiple SFP modes.

Both SM (single-mode) and MM (multi-mode) optical modules are supported, with a transmission distance of up to 10 km, 8-bit and 10-bit outputs. SFP+ encapsulation for the optical module.

Supported module specifications include the following:

10G SFP+ SR optical module
10G SFP+ LR optical module

Technical characteristics

  • Independent, copy and backup modes are supported
  • Independent: 4 OPT ports are all used for output and have the same loading capacity. The loading capacity of one port is equal to that of 8 Ethernet H20 Video vall splicer Specifications www.novastar.tech 17 ports
  • Copy: OPT 1 and OPT 2 are used for main output. OPT 3 copies the output on OPT 1, while OPT 4 copies the output on OPT 2
  • Backup: OPT 1 and OPT 2 are used for main output. OPT 3 serves as the backup of OPT 1, while OPT 4 serves as the backup of OPT 2.
  • Power consumption: 39 W
  • Dimensions: 193 × 247.12 × 21.15 mm
  • Weight: 500 g

  • Notes:
    • Four 10G SFP+ LR optical modules are included with the card and are already installed into the OPT ports
    • When the screen is loaded by the H_4xfiber sending card, the preset transition effect supports cut only
    • When the screen is loaded by the H_4xfiber sending card, NovaLCT V5.4.4.6.CRM7401 is required for screen configurations
40_01_small.jpg

£ 4.658,35

Tax excluded SKU: H4XOPTOUT EAN: 0

Recently viewed products