I/O card - 2 x RS232 / RS485 / RS422 ports - 1 x Ethernet - 3 x I/O - 3 x relay out
I/O board with 2 RS232 / RS485 / RS422 ports, 1 x Ethernet, 3 x I/O and 3 x relay outputs. This card can be installed in input card slots.
Main features
- 2 x COM
- Programmable RS422/RS485/RS232 ports that are used to control the devices that adopt RS422/RS485/RS232 protocol
- 1 x Ethernet
- Control the device connected to this card
- 10/100Mbps self-adaptive
- TCP/IP protocol and UDP/IP protocol supported
- 3 x I/O
- Trigger the execution of the function requirements via programming
- Input and output modes supported
- Pins 1, 2 and 3 can be set to either the input or output, and pin G is the common grounding pin for pins 1, 2 and 3
- 3 x relay outputs
- Connect to the relay to control the power on and off the connected device
- Voltage: 30 VDC, current: 3A at maximum
- Six pins are divided into three groups, which can be connected or disconnected via programming
- 3 x IR outputs
- Programmable infrared control supported
- Pins 1, 2 and 3 are used for infrared emission, and pin G is the common grounding pin for pins 1, 2 and 3
- Power consumption: 1.2 W
- Dimensions: 193 × 247.12 × 21.15 mm
- Weight: 400 g
English 
French
