GHOST MK2 con 2 porte di trasmissione da 1 Gbit - F.O. DUAL opticalCON mono-modale (sul pannello frontale) + 2 porte di trasmissione da 10 Gbit - F.O. DUAL opticalCON multi-modale (sul pannello posteriore) + scheda H-DC. Basata sull'ultima tecnologia FPGA XZ7, la scheda H-DC è in grado di fornire 4 clock hardware fisici indipendenti sulle quattro porte utente G-mk2 da 1 a 4.
Technical characteristics
Connectivity & interface
Front panel | 10 x 10 Base-T / 100 Base-TX / 1000 Base-T etherCON 10 x 8 caracters LCD sceens 2 x 1000 or 10,000 Mbps opticalCON DUAL ports 2 LEDs (Status-Traffic, ID) on each port 1 x configuration and navigation function switch |
Rear panel | 4 x 10 Base-T / 100 Base-TX / 1000 Base T-etherCON ports 2 x 1000 or 10,000 Mbps opticalCON DUAL ports 2 x IEC power sockets (internal redundant power supply) |
Software | SNMPv3 & SSH remote protocol "Emulate Mode" |
Processing
Mother board | 1 x Marvell 98DX Data flow: up to 95.23 Mbps Switching capacity: 128 Gb/s |
Network | 250 x groups available 16000 MAC address capacity IEEE 802.1p traffic priority |
General
Size (W x D x H) | 482.60 x 368 x 43.60 mm |
Weight (without options) | 1.7 kg |
Power consumption | 100 - 127 VAC 0.6 A, 200 - 240 VAC 0.4 A |
Power supply | 100 - 240 VAC 50/60 Hz |
Idle power | 19.5 W |
Maximum power rating | 26.6 W |
Thermal dispersion (without options) | 80.36 BTU/h (110 V 60 Hz) |
Storage temp. / humidity | -40 to 70 °C / 5 - 90% without condensation |
Operating temp. / humidity | 0 to 45 °C / 10 - 90% without condensation |
Altitude | up to 3 km |
Operating noise | without FAN |
Package
Package includes | 1 x GHOST MK2 engine 2 x power cord IEC13 Lock |
H-DC internal card