USB 2.0 to DMX-512 Interface, 1 x DMX-IN / OUT
USB ONE è un cavo d'interfaccia USB 2.0 > DMX-512 con 1 x DMX-IN / OUT. Questa è una delle più piccole interfacce USB per l'uscita o l'ingresso DMX presenti sul mercato.
Consente di controllare 512 canali DMX utilizzando il software MADRIX ed è pensato principalmente per l'ingresso DMX. È necessaria una MADRIX KEY (con licenza software) per attivare l'uscita DMX e un adattatore XLR da maschio a maschio a 3 o 5-pin.
Technical characteristics
- DMX-IN / OUT with 5-pin Neutrik XLR port: this device allows you to send or receive DMX data using 512 DMX channels. A male to male 3-pin or 5-pin XLR adapter is required for DMX-IN
- USB 2.0 standard: the USB 2.0 standard is fully supported to allow for a higher maximum speed of 480 MBit/s
- Power over USB: the interface is powered directly via the USB port and does not need an additional power supply
- High quality: the USB ONE represents high quality made in Germany and is very reliable
- Hot swapping and Plug & Play: devices can be connected to and disconnected from the computer during use and without a reboot
- Remote control: MADRIX software can be controlled remotely using the implemented DMX-IN functions
- Frame rate stability: up to 60 devices can be connected to a USB host controller without having any frame rate problems (60 DMX-512 interfaces amount to 30,720 DMX channels)
- Active USB: please connect every USB ONE to an active USB 2.0 port or use a USB 2.0 hub with a power supply
