2200 mW professional high-quality RGB laser, analog modulation
High-end professional Pure Diode laser, class 4, with analogue RGB modulation, high speed galvo scan, ideal for graphics, logo projection, volumetric effects and for creating surprising and captivating light shows. With its red, green and blue color sources, this laser produces a total power of 2200 mW, with an extremely low divergence of less than 1.2 mrad. The beam size is less than 4 x 2 mm and the maximum beam angle is 60°. With analog modulation and 128 pre-recorded patterns, the Evolite Infinium 2200 RGB offers 13 or 25 channel DMX modes. Enables very high speed galvo scans of 35 kpps @ 8° for smooth and precise movements. In the event of a failure of the mirror motors, the "Scan Fail Safety" system automatically switches off the laser for maximum safety. The two-part housing with ATS technology provides additional protection for dust-sensitive components. Buttons for dimming each source are located on the rear panel, with the laser output on the front. The safety key to block the laser ignition and the interlocking connector for the remote stop button (optional) ensure safe operation.
Light sources: laser diodes red 638 nm / 600 mW, green 520 nm / 600 mW, blue 447 nm / 1000 mW
2086 mW total guaranteed power
Analog modulation
Class 4
Safety key
Scan Fail Safety system that automatically turns off the light of the laser in case of of mirrors scans failure
35 kpps @ 8°ultra-fast galvo scans
Beam angle: 60°
X/Y a x is adjustment knob
Optional Pan/Tilt inversion
RGB separated dimmer adjustment knobs
Automatic mode / sound detection / DMX / ILDA
IN and OUT for ILDA interface
13 or 25 DMX channels, 128 automatic programs
Power supply voltage: 100 - 240 VAC 60 Hz
2 layers housing, to protect sensitive components from dust (ATS Technology)
English 
French
