XFW-CGW100-1 - Flexa wireless Gateway 868 MHz USB connection to PC
Ask for price
SKU: XFW-CGW100-1
product.detail.ean: 0
Flexa wireless Gateway 868 MHz USB connection to PC
The Gateway, the core of the system
Not a simple data conveyor but an intelligent machine that constantly communicates with cells or repeaters.
3 ways of power supply
The active cells must constantly communicate with the Gateway which must always be on, even in the absence of a PC. When connected to the PC it is powered via USB. Without the USB cable, the internal backup battery takes over. For long periods without connection to the PC, the AC 220 / 125 V input with powerCON TRUE1 connector is available.
The main information directly on the panel
Four RGB LEDs constantly show the system status
L1: Tx LED is blue when transmitting
L2: Rx LED is green when receiving
L3: Yellow only when AC supply or USB supply is connected: Blinking Yellow = Charging
Solid Yellow= Fully Charged
Red = no external power supply is connected (AC Power supply or USB Power supply) and battery is Low
L4: Cyan LED blinking when AC supply connected, Red blinking in all the other cases (it means USB supply or Battery Supply) (it is like an ON/OFF indication)
Max No. of cells per system (one Gateway): 100 unit
Max No. of repeaters per Gateway: 5 unit
Range (Cells/Gateway): up to 600 m (line-of-sight)
Range (Repeater/Gateway): Up to 700 m (line-of-sight)
Operation with backup battery only: up to 100 h
Frequency range: 868 MHz
Data storage: local PC (connected to Gateway via USB-A cable)
Repeater/Gateway Connection: Sub-1 GHz radio connection
Installation: Plug & Play (no radio set up)
Backup battery: 2.6 Ah 18650 battery
Built in M10 female thread connection: to better interface with truss clamps
English 
French
