AxC-DANTE card with 64 IN and 64 OUT with 4 Gigabit ports on 2 etherCON and 2 RJ45 and remote IP control. It must be inserted into the slot available on the rear panel of the Agora H1 to build the right audio bridge. Using just one slot in the ToolBox, the AxC-DANTE allows you to control Dante networks and also connect them with other network configurations.
AxC-DANTE applications
Main features
AxC-DANTE: Dante card for the AuviTran Audio ToolBox platform
| Size | 200 x 100 x 40 mm‚ AuviTran Audio ToolBox platform cards |
| Power supply | +12 V / +3.3 V - Through AuviTran Audio ToolBox backplane |
| Storage: temp / humidity | - 5 °C to 70 °C / 0% to 95% (non-condensing) |
| Operating: temp / humidity | 0 °C to 50 °C / 5% to 90% (non-condensing) |
| Connectors | 2 x Neutrik EtherCon RJ45-XLR female connectors 2 x RJ45 connectors |
| Dante operation modes | Switch‚ Integrated Gigabit switch Redundant with primary and secondary ports, replicated on ports 3 and 4 |
| Audio outputs | Up to 64 channels |
| Audio inputs | Up to 64 channels |
| HA remote modes | Yamaha Rio CL console / Audinate MY16AUD |
| Sample format | 24/32 bits |
| Sample rate | 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz |
| Synchronization | Automatic from Dante network |
Control and monitoring environment
| AVS-Monitor | AVS-Monitor enables to remotely set, control and monitor an EtherSound network and provides enhanced control pages to manage the specific parameters of cards inserted in the different slots |
| Audinate Dante Controller | For audio patch of any Dante device, and additional features: multicast/unicast, redundant mode or switch mode |
| Audinate Dante Virtual Sound card | The optional Dante Virtual soundcard software allows your PC/Mac to connect to a Dante audio network. Note: a license is required to use this feature‚ please refer to Audinate‚ website for more information |
English 
French
