AxC-ES100 - Ethersound card with 64 IN and 64 OUT on 2 x etherCON with remote control on RJ45 and RS232

€ 1.854,40

SKU: AxC-ES100 EAN: 0

Add to cart

Ethersound card with 64 IN and 64 OUT on 2 x etherCON with remote control on RJ45 and RS232

Ethersound card with 64 IN and 64 OUT on 2 etherCON with remote control on RJ45 and RS232. It must be inserted into the slot available on the rear panel of the Agora H1 to build the right audio bridge. Just like every AxC card within the Audio ToolBox range, the AxC-ES100 can also be used in the AVBx3 or AVBx7 platforms. Utilizing a slot of either ToolBox, the AxC-ES100 allows you to bring both EtherSound and ASIO interfaces into your network setup.

Applications AxC-ES100:

In combination with other AuviTran Audio ToolBox cards, the AxC-ES100 card opens up interesting possibilities for professional audio systems

Coupled with the AxC-AX4M microphone board and the AxC-AX4O analog output board, the AxC-ES100 tunneling system allows you to set and monitor all ToolBox parameters, such as microphone gains, using the AVS-Monitor interface or a Yamaha mixer HA remote control /li>
Suitable for all PA, live audio applications and adapted to Yamaha consoles.

Main features:

Using only one Audio ToolBox slot, the AxC-ES100 can be used with AVBx3 or AVBx7 platforms
64 inputs and 64 outputs
ASIO through the third port (up to 64 channels in and 64 channels out)
One RS232 port compatible with the Yamaha HA remote control
Remote management with AVS-Monitor software
Two etherCON connectors allowing 64 channels to be extracted and 64 channels inserted into the ES100 network

AxC-ES100: EtherSound card for the AuviTran Audio ToolBox platform

Size	200 x 100 x 40 mm‚ AuviTran Audio ToolBox platform cards format
Power supply	+12 V / +3.3 V - Through AuviTran Audio ToolBox backplane
Storage: temp / humidity	- 5 °C to 70 °C / 0% to 95% (non-condensing)
Operating: temp / humidity	0 °C to 50 °C / 5% to 90% (non-condensing)
Connectors	2 x Neutrik EtherCon RJ45-XLR female connectors (EtherSound ES100 from/to links), 1 x RJ45 connector for third port (PC control and ASIO Streamer interface), 1 x Sub-D9 (RS232) serial interface
Audio outputs	64 channels extracted from any of the 64 EtherSound downstream channels or from any of the 64 EtherSound upstream channels in bidirectional mode @ 44.1 kHz or 48 kHz
Audio inputs	64 channels inserted from any of the 64 EtherSound downstream channels or from any of the 64 EtherSound upstream channels in bidirectional mode @ 44.1 kHz or 48 kHz
Sample format	24 bit
Sample rate	44.1 kHz, 48 kHz, 88,2 kHz, and 96 kHz
Synchronization	Automatic from EtherSound network

ASIO

I/O count	Up to 64 ASIO inputs and 64 ASIO outputs from/to EtherSound
Sample format	24 bit
Sample rate	44.1 kHz, 48 kHz, 88,2 kHz, and 96 kHz

Host PC minimum specifications

Operating system	Windows 8/Seven/Vista/XP for 32 or 64 bit versions (XP not recommended for ASIO due to its poor NDIS priority management)
Processor / memory	Dual core CPU, clock speed > 2 GHz + At least 2 GB for Windows 8, 7 or Vista
Network	100Mbits full duplex Ethernet adapter with latest NDIS driver (Performances of the ASIO driver are directly related to NIC driver)
Storage	7200 rpm disk or better for ASIO

Control and monitoring environment

AVS-Monitor

AVS-Monitor enables to remotely set, control and monitor an EtherSound network and provides enhanced control pages to manage the specific parameters of cards inserted in the different slots

€ 1.854,40

Tax excluded SKU: AxC-ES100 EAN: 0

Add to cart