AM 20N - Preamplifier / amplifiers 20 W, 4 Inputs, 8 ohm, 25 / 70 / 100 V, 220 - 240 V AC / 12 V DC

Rondson

Ft 160.175,33

prices may have variations due to the currency fluctuation

SKU: 00502
Ask for availability To find out the price dedicated to you, follow the link and register on audioeffetti.com. Our office will contact you as soon as possible.

Preamplifier / amplifiers 20 W, 4 Inputs, 8 ohm, 25 / 70 / 100 V, 220 - 240 V AC / 12 V DC

Integrated amplifier / mixer with 100 V line output, 20 W power. In addition to the speaker outputs at 25, 70 and 100 V, there is the 8 ohm low impedance one. Operation with 230 VAC or 12 VDC mains for AM 20N, AM 40N and 24 VDC for AM 60N.

Main features

  • 1 balanced DIN/jack/XLR microphone input MIC 1 (priority) via Talk Over or remote control
  • 1 balanced microphone input (jack/XLR) MIC 2. These 2 inputs can be switched to Phantom-powered microphone (internal operation), a chime (2 tones "ding dong") can be activated by the MIC 1 microphone connected to the 5-pin DIN socket (RONDSON PA 100D call station) or to the stereo jack socket on the front panel (PA 100J call station).
  • 1 telephone input, super priority emergency message
  • 2 RCA AUX input (tuner, CD, etc.)
  • 1 modulation output for connection of a power unit

Technical characteristics

Type amplifier / preamplifier
Power supply 115 - 230 VAC 50/60 Hz - switchable ±10%
12 VDC (max. deviation 10%)
Output power 20 WRMS
30 W max.
Speaker outputs 8 ohm - 25 / 70 / 100 V
Line output 1 V, 600 ohm
Inputs MIC 1 / 2: 1 mV, 250 ohm symmetrical power supply
configurable Phantom power supply
AUX: 200 mV, 47 kohm asymmetrical
TEL: 0.1 to 1 V, 600 ohm, symmetrical, adjustable
Frequency response MIC 1 / 2: 60 Hz - 15 kHz ±3 dB
AUX: 60 Hz - 15 kHz ±3 dB
TEL: 100 Hz - 15 kHz ±3 dB
THD Less than 1% at 1 kHz at RMS power
S/N ratio all CCN volume settings: 75 dB below nominal power
MIC 1 / 2: 60 dB below RMS power
AUX: 70 dB below RMS power
TEL: 70 dB below RMS power
Tone settings bass: ±10 dB at 100 Hz - treble: ±10 dB at 10 kHz
Settings MIC 1 / 2: volume control
AUX: volume control - Tone: bass and treble
TEL: entry level
CHIME: inter ON/OFF
115 - 230 V: voltage switch
Display power ON indicator light
Consumption mains: 100 W, battery: 4 A
Chime 2 tone ding dong preceding 1 microphone call
Priority by detection / MIC 1 connected to DIN or jack
Priority levels TEL/EMER MIC 1 MIC 2 AUX
     3             2      1       1
Option 19" rack mounting 2 U mounting brackets EQ 2040
Dimensions (W x D x H) 27.2 x 30 x 8.8 cm
Weight 5.7 kg
Rondson

Ft 160.175,33

prices may have variations due to the currency fluctuation

SKU: 00502
Ask for availability To find out the price dedicated to you, follow the link and register on audioeffetti.com. Our office will contact you as soon as possible.

Download

Related products

Recently viewed products