Risultati della ricerca

ICE007 - 4 x 5 L Super Bubble Fluid, pre-diluted liquid ready to be used with the Bubble Master machines

Super Bubble Fluid is a pre-diluted liquid, ready to be used with the Bubble Master range of machines. It fits very high standards, giving an excellent result: the bubbles, transparent, vivid and dry, fly for a long time in the air. Super Bubble Fluid is an odorless and non-toxic liquid, ideal for any situation. It is supplied in 4 tanks of 5 liters each. Found in: Home > Special Effects > Bubble Effects > Consumables for Bubble Machines > ICE007 - 4 x 5 L Super Bubble Fluid, pre-diluted liquid ready to be used with the Bubble Master machines Read more

MG02 - Double Shot Flash Gun, allows you to fire two times before you need to reload

The Double Shot Flash Gun works on the same principle as the Electronic Flash Gun, therefore with actuation in the palm of the hand, however the double barrel design of this device allows you to fire two times before you need to reload. The fireballs that are produced can reach up to a maximum of about 3.5 meters. Requires Flash Paper, Cotton Paper and one AA alkaline battery not included. Found in: Home > Special Effects > Various Special Effects > Various Special Effects > MG02 - Double Shot Flash Gun, allows you to fire two times before you need to reload Read more

MG11 - Electronic Flash Wand, "magic wand" that produces flames up to 3.5 m, battery and Flash Cotton need

The Electronic Flash Wand is a "magic wand" that produces flames up to 3.5 meters and that requires Flash Cotton or Flash Paper to work, as well as two AA alkaline batteries. Thanks to a button on the wand you will be ready to amaze your audience with this fireball! Found in: Home > Special Effects > Various Special Effects > Various Special Effects > MG11 - Electronic Flash Wand, "magic wand" that produces flames up to 3.5 m, battery and Flash Cotton need Read more

IG21 - Glow Plug, 1.5 V candle used in the Hand Flasher and Flint Flasher products

The Glow Plug is a 1.5V one used in the Hand Flasher and Flint Flasher products. A fundamental accessory of great and indubitable quality. Found in: Home > Special Effects > Various Special Effects > Various Special Effects > IG21 - Glow Plug, 1.5 V candle used in the Hand Flasher and Flint Flasher products Read more

1705 - Wax Torch, torch that recalls the Olympic one, burning time of approximately 1 h

Do you need a torch that recalls the Olympic one, but that is handy and easy to use? The Wax Torch is the perfect solution: burning time of approximately one hour, ideal for processions, parades, concerts or events. It lights up with a simple naked flame. Found in: Home > Special Effects > Various Special Effects > Various Special Effects > 1705 - Wax Torch, torch that recalls the Olympic one, burning time of approximately 1 h Read more

1120 - 6/24 Pyroflash Unit, 6 channel control unit to ensure a large number of special effects combinations

Do you need a versatile and complete system with pyrotechnic effects? Do you have to launch numerous and complex fire effects in sequence? The Pyroflash 6/24 is the Controller for you, capable of "firing" a lot of combinations of pyrotechnic effects, including the famous Pyroflash and ProStage II. It is basically a 6-channel control unit that ensures a large number of combinations of speci Found in: Home > Special Effects > SFX Controllers > Firing Systems > 1120 - 6/24 Pyroflash Unit, 6 channel control unit to ensure a large number of special effects combinations Read more

1117 - One Shot Pyro Controller, portable pyrotechnic ignition system, capable of firing max. 2 ignitors in series

The fastest and easiest system for controlling your pyrotechnic effects: One Shot Pyro Controller is the portable and compact pyrotechnic ignition system (it measures 160 x 36 x 74mm and it weighs only 250 grams), capable of firing a a maximum of 2 ignitors in series. The One Shot Pyro Controller is equipped with an fire button, a continuity test LED and an arm key switch. A 9V battery is required Found in: Home > Special Effects > SFX Controllers > Firing Systems > 1117 - One Shot Pyro Controller, portable pyrotechnic ignition system, capable of firing max. 2 ignitors in series Read more

PROSTAGE 6 - 6-Way pyro controller powered by batteries

Outdoor sets are always the most difficult, there are a lot of logitic issues, first of all, power supply. How many times you found the right spot for your safe zone, but there were not power supply for your remote controller. LeMaitre developed the ProStage 6-Way Controller with battery supply. You can fire individually all the six channels with 50 metres of cable and up to 8 effects wired in ser Found in: Home > Special Effects > SFX Controllers > Firing Systems > PROSTAGE 6 - 6-Way pyro controller powered by batteries Read more

1114 - 18 V power supply unit for 2/6 way controller

ProStage 2/6-Way Controllers are developed for using it with battery supply. As an optional you can buy this wallmart power supply for the controller. Found in: Home > Special Effects > SFX Controllers > Firing Systems > 1114 - 18 V power supply unit for 2/6 way controller Read more

PP100 - Flash Tube Holder, base support that allows to position the Flash Tube even hanging on a truss

There are different supports for the various Le Maitre products, which offer just as much quality and comfort: the Flash Tube Holder, for example, is an excellent very resistant and safe base that allows you to position the Flash Tube even hanging on a truss. Found in: Home > Special Effects > Various Special Effects > Accessories for Various Special Effects > PP100 - Flash Tube Holder, base support that allows to position the Flash Tube even hanging on a truss Read more

PP103 - 18 mm 3 way array plate mine holder, both to be fixed on the floor and on a truss

If you need a holder that can support up to three pyrotechnic effects, Le Maitre has the solution: 18mm 3 Way Array Plate, both to be fixed on the floor and on a truss, in maximum safety. Found in: Home > Special Effects > Various Special Effects > Accessories for Various Special Effects > PP103 - 18 mm 3 way array plate mine holder, both to be fixed on the floor and on a truss Read more

PP107 - 18 mm 60° mine holder to tilt the pyro effects 60° degrees in maximum safety

The 18 mm support for your pyrotechnic effects, which allows you to tilt them 60 degrees in maximum safety. A perfect solution to use your effects with Le Maitre certified quality supports. Found in: Home > Special Effects > Various Special Effects > Accessories for Various Special Effects > PP107 - 18 mm 60° mine holder to tilt the pyro effects 60° degrees in maximum safety Read more

PP108 - 18 mm 45° mine holder to tilt the pyro effects 45° degrees in maximum safety

18mm 45 Degree Holder, a Le Maitre holder that is securely fixed to the floor, ideal for any event. Once ready, just prepare your pyrotechnic effect and place it in the cavity. Found in: Home > Special Effects > Various Special Effects > Accessories for Various Special Effects > PP108 - 18 mm 45° mine holder to tilt the pyro effects 45° degrees in maximum safety Read more

PP109 - 27 mm 3 way array plate mine holder with three compartments for your pyro effects

27mm 3 Way Array Plate is the stand with three compartments for your pyrotechnic effects. Each one pointed in a different direction, will make your event unforgettable. Found in: Home > Special Effects > Various Special Effects > Accessories for Various Special Effects > PP109 - 27 mm 3 way array plate mine holder with three compartments for your pyro effects Read more

PP110 - 27 mm 5 way array plate mine holder with three compartments for your pyro effects

A very high quality support, with 5 cavities in which to insert the 27mm diameter fireworks. It can be mounted both on a truss and fixed on the floor. Found in: Home > Special Effects > Various Special Effects > Accessories for Various Special Effects > PP110 - 27 mm 5 way array plate mine holder with three compartments for your pyro effects Read more

RESULTS OF YOUR RESEARCH