Professional LED display All-in-One Controller
Novastar VX-400 è un controller all-in-one che integra un processore video, adatto per installazioni di schermi LED di piccole e medie dimensioni. Può gestire fino a 2,6 Mpixel in totale, fino a 10.240 pixel di larghezza o fino a 8192 pixel di altezza, l’ideale per applicazioni con schermi LED anche molto larghi e alti.
VX-400 offre una varietà d’ingressi video (1 x 3G-SDI, 2 x HDMI 1.3, 1 x DVI, 1 x OPT1) e consente di passare senza problemi tra diverse sorgenti di ingresso. Inoltre, supporta fino 2 x 2K x 1K layer e la funzione di ridimensionamento. La latenza ultra-bassa è di 1 frame.
Oltre alla scheda d’invio integrata con 4 porte Ethernet, offre anche la possibilità d’installare due moduli SFP; questi moduli consentono di coprire distanze maggiori rispetto al limite di 100 m dei cavi Ethernet. OPT 1 copia l'uscita su 4 porte Ethernet, OPT 2 copia o esegue il backup dell'uscita su 4 porte Ethernet. Per controllare installazioni di schermi LED ancora più grandi, è disponibile la funzione Image Mosaic che consente di combinare fino a quattro unità VX-400.
La configurazione dello schermo può essere effettuata tramite connessione USB ed Ethernet. Il formato 1U si adatta perfettamente ai rack da 19", rendendo VX-400 ancora più adatto a società di noleggio e installazioni fisse.
Input connectors
- HDMI 1.3 (IN & LOOP)
- HDMI 1.3
- DVI (IN & LOOP)
- 3G-SDI (IN & LOOP)
- Optical fiber port (OPT1)
Output connectors
- 4 x Gigabit Ethernet ports. A single device unit drives up to 2.6 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels
- 2 x fiber outputs
- OPT 1 copies the output on 4 Ethernet ports
- OPT 2 copies or backs up the output on 4 Ethernet ports
- HDMI 1.3 for monitoring or video output
- Self-adaptive OPT 1 for either video input or sending card output. Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device
Audio input and output
- Audio input accompanied with HDMI input source
- Audio output via a multifunction card
- Output volume adjustment supported
Low latency
- Reduce the delay from the input to receiving card to 20 lines when the low latency function and bypass mode are both enabled.
2 x layers
- Adjustable layer size and position
- Adjustable layer priority
Output synchronization
- An internal input source can be used as the sync source to ensure the output images of all cascaded units in sync
Powerful video processing
- Based on SuperView III image quality processing technologies to provide stepless output scaling
- One-click full screen display
- Free input cropping
Automatic screen brightness adjustment
- Adjust the screen brightness automatically based on the ambient brightness collected by the external light sensor
Easy preset saving and loading
- Up to 10 user-defined presets supported
Multiple kinds of hot backup
- Backup between devices
- Backup between Ethernet ports
Mosaic input source supported
- The mosaic source is composed of two sources (2K × 1K @ 60) accessed to the OPT 1
Up to 4 units cascaded for image mosaic
Three working modes
- Video controller
- Fiber converter
- Bypass
All-round color adjustment
- Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and gamma
Pixel level brightness and chroma calibration
- Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, effectively removing color discrepancies and greatly improving LED display brightness and chroma consistency, allowing for better image quality
Multiple operation modes
- Control the device as you wish via V-Can, NovaLCT or device front panel knob and buttons.
