PoE 60 W Class-D active loudspeaker with integrated Dante module. Intended to offer an audio solution connected to a network. Powered by a single network cable (Ethernet cable, CAT5 or higher) simplifies installations compared to traditional speakers. It is also compliant with the IP/IT protocols of most buildings.
This loudspeaker can be mounted indoors only, which makes it suitable for use in places such as airports, train stations, conference rooms, hotels, etc.
Technical characteristics
| Type | loudspeaker POE class D 60 W - Dante |
| Driver | driver 6.5" +1" |
| Sensitivity | 94 dB/W/m |
| Frequency response | 50 Hz - 20 kHz |
| Max. SPL | 113 dB |
| Angle dispersion (H x V) | 90° x 60° |
| Power handling | 60 W |
| Audio Input | Dante (Ultimo2) |
| Audio routing | Dante control software |
| Amp technology |
Class-D |
| Protections | thermal, overload and short-circuit protection |
| Transmission speed | 100 Mbps |
| Connector Input | RJ45 |
| POE cable type | CAT5 or higher |
| Safety standards | IEEE802.3af and IEEE802.3at, CE, UL (or ETL, TVU), C-TICK, FCC, CCC |
| Dimensions (W x D x H) | 30 x 20 x 16 cm |
| Weight | 3.4 kg |
English 
French
